Developing Ultra-High-Performance Concrete Using ‎Local ‎Materials from West Azerbaijan: An ‎Experimental Study

Developing Ultra-High-Performance Concrete Using ‎Local ‎Materials from West Azerbaijan: An ‎Experimental Study

Amirhossein Arman1 Saeed Sotoudeh2 Ayda Kazemi motlagh3 Erfan Shafei4 Tadeh Zirakian5 Mohammad reza Saei6 Abdollah Tabaroei7

1) B.Sc., Department of Civil Engineering, Urmia University of Technology (UUT)‎, Iran.‎
2) B.Sc. Student, Department of Civil Engineering, UUT‎, Iran.‎
3) B.Sc. Student, Department of Civil Engineering, UUT‎, Iran.‎
4) Associate Professor, Department of Civil Engineering, Urmia University of Technology‎, ‎Iran.‎
5) Associate Professor, Department of Civil Engineering and Construction Management‎, ‎California State University‎, ‎Northridge‎, USA.‎
6) ‎Instructor‎, Concrete Lab, Department of Civil Engineering, UUT‎, Iran.
7) Assistant Professor, Department of Civil Engineering, Bojnourd, Eshragh Institute of Higher ‎Education, Bojnourd, Iran‎.‎

IOI Code : AACA-AAFKCE
Publication : 10th.International Conference on Researches in Science & Engineering & 7th.International Congress on Civil, Architecture and Urbanism in Asia(10icrsie.com)
Abstract :
    Ultra-high-performance concrete (UHPC) possesses outstanding mechanical and ‎physical properties, ‎making it ideal for ‎critical infrastructure projects like bridges, ‎skyscrapers, and tunnels. ‎ UHPC is ‎characterized by its ‎remarkable compressive ‎strength, exceptional durability, and superior performance in ‎extreme ‎environmental ‎conditions. It is manufactured using a combination of mineral and chemical ‎additives, ‎‎such as superplasticizers, optimized aggregate gradation, low water-to-cement ratios, ‎and ‎nanomaterials. ‎This study explored the feasibility of developing UHPC using local ‎materials from West ‎Azerbaijan ‎province, focusing primarily on aggregate gradation, ‎water-to-cement ratio, and micro silica ‎‎‎(MS). Specimens were prepared under ‎standardized conditions and cured in a saturated lime-water tank at ‎‎a controlled ‎temperature of 23 ± 1°C until testing. ‎ Compressive strength tests were conducted on ‎‎100 mm ‎‎cubic specimens. The results showed that using locally sourced basalt ‎aggregate from the Zola Dam region ‎‎in Salmas City, a 28-day compressive strength of ‎approximately 154 MPa was achieved. This study ‎‎demonstrates the feasibility of ‎producing UHPC with local materials from West Azerbaijan Province, ‎‎exhibiting ‎desirable mechanical properties and offering a sustainable, economically beneficial ‎alternative ‎‎that reduces environmental impacts, including CO2 emissions from ‎transportation.‎

Keywords : ultra high performance concrete (uhpc) polycarboxylates superplasticizer micro ‎silica content ‎ compressive ‎strength local materials basalt‎