Nonlinear Dynamic Stress Analysis of an Orthotropic Steel Plate under Uniform Loading
Nonlinear Dynamic Stress Analysis of an Orthotropic Steel Plate under Uniform Loading
Iman Parsamanesh1 Amir Ayazi2 Mahmood Minavandchal3
1) Department of Civil Engineering, Safadasht Branch, Islamic Azad University, Tehran, Iran
2) epartment of Civil Engineering, Shahre-Qods Branch, Islamic Azad University, Tehran
3) Department of Civil Engineering, Shahre-Qods Branch, Islamic Azad University, Tehran
IOI Code
:
AACA-ABZAKD
Publication :
10th.International Conference on Researches in Science & Engineering & 7th.International Congress on Civil, Architecture and Urbanism in Asia(10icrsie.com)
Abstract :
This paper presents a geometrically nonlinear dynamic stress analysis of a stiffened orthotropic steel plate subjected to a uniformly distributed sinusoidal transverse load. The plate is reinforced by longitudinal and transverse T-section stiffeners and modeled using a nonlinear dynamic finite element formulation. The material behavior is assumed to be linearly elastic, while geometric nonlinearity is incorporated via the von Kármán theory. Four edge-support configurations are examined—SSSS, SCSC, SCCS and CCCC—in order to clarify the influence of boundary conditions on the time-dependent normal and shear stresses at the junction of the longitudinal stiffener and the plate. The results show that the boundary conditions have a pronounced effect on the dynamic stress components , and . For , the maximum difference between configurations reaches about 11% (between SCCS and CCCC), while the minimum discrepancy is approximately 0.017% (between SCSC and SSSS). For , the deviation relative to the SSSS case varies from about 0.197% (SCSC) up to 31.72% (CCCC). The shear stress exhibits differences ranging from 0.158% (SCSC vs. SSSS) to 49.3% (CCCC vs. SSSS). These findings highlight the critical role of edge restraints in governing dynamic stress demands in stiffened orthotropic plates and provide practical guidance for their accurate modeling and safe design under dynamic loading.
Keywords : nonlinear dynamic stress analysis stiffened orthotropic steel plate boundary conditions finite element method von kármán geometric nonlinearity