Quantitative Accuracy Assessment of UAV-Based Photogrammetric 3D Models for Extracting Breaklines (Bench Edge Lines) in Open-Pit Marble Mines
Quantitative Accuracy Assessment of UAV-Based Photogrammetric 3D Models for Extracting Breaklines (Bench Edge Lines) in Open-Pit Marble Mines
Amin Fakhar1 Naser Naserian2 Behnam Paydar Jahromi3
1) 1- Master s student in Surveying Engineering, Photogrammetry major, Arian Amirkola Non-Profit University,
2) 2- Master of Surveying, Photogrammetry, Arian Amirkola Non-Profit University,
3) 3- Master s degree in Surveying Engineering, Geodesy major, Islamic Azad University, Shahrood Science and Research Branch,
IOI Code
:
AAGF-ABCBEG
Publication :
9th International Conference on Applied Researches in Science & Engineering (carseconf.com/9th)
Abstract :
In this study, a high‑accuracy three‑dimensional model was generated using images acquired by a Phantom 4 Pro UAV and processed in Agisoft Metashape to evaluate the performance of UAV‑based photogrammetry in extracting the bench geometry of an open‑pit marble mine. The flight mission was designed with appropriate overlap, and the dataset was assessed using Ground Control Points (GCPs) and check points. The processing results indicated that image quality, the number of tie points, and the reprojection error were all within standard photogrammetric thresholds, and the internal calibration of the FC6310 camera—with very small residuals—confirmed the geometric stability of the model. Error analysis of the control points showed that the overall RMSE of the model was 4.22 cm. Furthermore, comparison of DSM‑derived elevations with dual‑frequency GPS measurements demonstrated excellent agreement, with negligible horizontal discrepancies between corresponding points.The main innovation of this research lies in the quantitative accuracy assessment of photogrammetrically extracted breaklines and their automatic conversion into engineering‑ready outputs, including TXT, Shapefile, and DXF formats. Unlike traditional manual surveying and geometric computations, the proposed semi‑automated workflow significantly improves data production speed, reconstruction accuracy, and direct usability in CAD and GIS environments. The results confirm that the breaklines extracted from the 3D model accurately represent the true bench edges of the mine. Overall, UAV photogrammetry can serve as a fast, safe, and cost‑effective method for extracting bench geometry, analyzing slope stability, and calculating excavation volumes in open‑pit mining operations.
Keywords : photogrammetry 3d model open‑pit marble mines breakline