Predictive Modeling of Foreign Object Damage and Calibration of Johnson–Cook Parameters under Extreme Thermo-Mechanical Conditions
Predictive Modeling of Foreign Object Damage and Calibration of Johnson–Cook Parameters under Extreme Thermo-Mechanical Conditions
ALIREZA KHALEGHI AMROABADI1
1) Department of Mechanical Engineering, Islamic Azad University, Najaf Abad Branch, Najaf Abad, Iran
IOI Code
:
ABEB-ABHFBA
Publication :
4th International Conference on Recent Advances in Engineering, Innovation and Technology - Belgium(eitconf.com)
Abstract :
In this study, the Johnson–Cook plasticity model parameters for the nickel-based superalloy Inconel 718 were extracted and determined with the aim of enhancing the accuracy of finite element simulations in analyzing foreign object damage (FOD) on high-pressure compressor blades of gas turbine engines. Given the sensitivity to strain rate and high temperatures during the impact event, the Johnson–Cook model was selected due to its capability to describe material behavior under high-strain-rate conditions and thermal variations. In this regard, using experimental data obtained from compression tests at various strain rates and temperatures, the model coefficients (including yield stress, strain hardening modulus, strain hardening exponent, strain rate sensitivity, and thermal softening parameter) were extracted. Finally, the accuracy of the extracted parameters was validated by implementing them into an explicit dynamic simulation code and comparing the deformation profiles and damage patterns resulting from the foreign object impact simulation with the results of ballistic tests. The results indicate that the determined parameters are capable of predicting the mechanical behavior of Inconel 718 under impact conditions with high accuracy, which leads to an improvement in the reliability of damage modeling in the design of compressor blades.
Keywords : nickel based superalloys johnson cook model foreign object damage (fod) finite element simulation compressor blade high strain rate material calibration