Microplastic removal from aquatic system via flocculation-coagulation and sedimentation

Microplastic removal from aquatic system via flocculation-coagulation and sedimentation

Haleh Habibnejad Roshan1 Mohsen Taghavijeloudar2

1) Department of Chemical Engineering, Babol Noshirvani University of Technology, 47148-71167, Babol, Iran
2) Department of Civil Engineering, Mazandaran Institute of Technology, 47481-61136, Babol, Iran (mohsentj63@gmail .com;

IOI Code : ABEB-ACAGBK
Publication : 4th International Conference on Recent Advances in Engineering, Innovation and Technology - Belgium(eitconf.com)
Abstract :
    Coagulation, flocculation, and sedimentation (CFS) offer an adaptable route for transferring microplastics (MPs) from water into recoverable solids. This mini-review synthesizes experimental and review evidence on removal mechanisms, conventional and biobased reagents, and barriers to implementation. Charge neutralization and patching facilitate attachment, while polymer bridging, sweep capture, and metal–biopolymer association promote aggregate growth. Effective separation additionally requires sufficient floc density and resistance to hydraulic disturbance. Studies using real-water matrices, modified cellulose, chitosan, plant extracts, and ballasted flocculation demonstrate promising but strongly condition-dependent performance. Importantly, continuous-flow removal can be lower than jar-test predictions, and faster settling need not imply near-complete MP removal. Cross-study rankings are constrained by differences in particle characteristics, dose definitions, water chemistry, and analytical endpoints. Turbidity reduction, floc incorporation, and polymer-specific effluent removal are not interchangeable; neither aggregation nor surface alteration demonstrates mineralization. Priorities include realistic particle mixtures, complete plastic balances, independent measurements of floc growth and settling, continuous operation, and management of MP-rich sludge. Sustainable application should be judged against a common effluent-quality target that includes residual reagents, material preparation, energy demand, and solids disposal.

Keywords : microplastics coagulation flocculation polymer bridging sedimentation hybrid treatment