Poromechanical–Hydraulic Insights into Carbonate Facies for Underground Hydrogen Storage: A Laboratory-Based Case Study Using Core and Microscopic Images
Poromechanical–Hydraulic Insights into Carbonate Facies for Underground Hydrogen Storage: A Laboratory-Based Case Study Using Core and Microscopic Images
Esmael Makarian1 Ayub Elyasi2 Alireza Behinrad3
1) Department of Mining Engineering, Tabriz (Sahand) University of Technology, Tabriz, Iran.
2) CAPE Consultant Group, Tehran, Iran.
3) Faculty of Petroleum and Natural Gas Engineering, Tabriz (Sahand) University of Technology, Tabriz, Iran.
IOI Code
:
ABEB-ACAGCE
Publication :
4th International Conference on Recent Advances in Engineering, Innovation and Technology - Belgium(eitconf.com)
Abstract :
Underground hydrogen storage (UHS) in carbonate reservoirs presents significant opportunities for large-scale energy storage, although complex pore architectures, diagenetic heterogeneity, and uncertain hydraulic–mechanical behavior pose important challenges to storage efficiency and long-term containment. This study presents an integrated petrographic, petrophysical, and poromechanical–hydraulic assessment of four representative carbonate facies (CF1–CF4) using core observations, thin-section petrography, and laboratory-derived porosity, permeability, and grain-density measurements. Facies-specific pore-network interpretations were developed to investigate potential hydraulic connectivity, flow restrictions, and implications for hydrogen injection and withdrawal. The results reveal substantial heterogeneity between pore-volume availability and hydraulic effectiveness. CF1 exhibits the highest average porosity (22.76%) with moderate permeability (5.56 mD), whereas CF2 demonstrates the highest average permeability (10.38 mD) despite its lower porosity (16.31%). In contrast, CF3 and CF4 exhibit lower average permeabilities (1.79 and 1.70 mD, respectively), reflecting potentially restricted hydraulic communication within their heterogeneous pore systems. Petrographic observations further indicate that micritization, dissolution, dolomitization, and cementation influence pore geometry, connectivity, and the configuration of the load-bearing mineral framework. The integrated assessment identifies CF1 as a potential pore-volume-rich storage domain, CF2 as the preferred initial candidate for injection–withdrawal evaluation, CF3 as a lower-transmissivity interval with additional storage potential, and CF4 as a low-permeability domain potentially contributing to internal flow restriction. However, hydrogen-specific multiphase-flow behavior, stress-dependent permeability, and sealing integrity require independent experimental validation. Overall, the proposed facies-based framework provides a practical foundation for preliminary UHS screening in heterogeneous carbonate reservoirs by linking pore-scale geological characteristics with hydraulic performance and potential poromechanical limitations.
Keywords : underground hydrogen storage (uhs) carbonate reservoirs reservoir geomechanics pore system architecture hydraulic connectivity porosity permeability relationships facies based screening