Comparison of Yield Stress, Elastic Modulus, and Glass Transition Temperature (Tg) Changes Between Virgin and Recycled Polymers with Different Reinforcement Percentages

Comparison of Yield Stress, Elastic Modulus, and Glass Transition Temperature (Tg) Changes Between Virgin and Recycled Polymers with Different Reinforcement Percentages

ARASH SHAHBAZI DASTJERDEH1

1) Department of Mechanical Engineering, Faculty of Engineering, Shahrekord University, Shahrekord, Iran.

IOI Code : ABEB-ACZCFF
Publication : 4th International Conference on Recent Advances in Engineering, Innovation and Technology - Belgium(eitconf.com)
Abstract :
    This research provides a comprehensive investigation into the effect of mechanical recycling (three cycles) on the mechanical and thermal properties of short glass fiber (SGF) reinforced polycarbonate (PC) composites. Composite samples with 0, 10, 20, 30, and 40 weight percentages of glass fibers in virgin and recycled PC matrices were produced through twin-screw extrusion and compression molding processes in accordance with ASTM D638 and ASTM D3418 standards. Tensile test results indicated that the addition of glass fibers significantly increases the elastic modulus and yield stress, while decreasing elongation at break. Recycled PC alone exhibited lower mechanical properties compared to virgin PC, particularly in yield stress and elongation. However, the addition of glass fibers was able to largely compensate for the property degradation caused by recycling; such that the recycled PC composite with 40% glass fibers had higher modulus and yield stress than virgin PC without reinforcement, although its elongation at break remained lower. DSC testing revealed that the glass transition temperature (Tg) experienced minor and statistically insignificant changes under the influence of recycling and glass fiber addition within the studied range. SEM microscopic analyses of the fiber/matrix interface confirmed a reduction in bonding quality and an increase in debonding in recycled composites, which is consistent with the decrease in their mechanical properties. This study demonstrates that recycled PC, with appropriate reinforcement, still possesses high potential for engineering applications, but optimization of the recycling process and the fiber/matrix interface is essential to achieve maximum performance.

Keywords : polycarbonate recycled polymer short glass fiber polymer composite mechanical properties glass transition temperature circular economy scanning electron microscopy