The Impact of Minimum Quantity Lubrication (MQL) on Tool Wear Reduction in Machining of Hard-to-Cut Materials
The Impact of Minimum Quantity Lubrication (MQL) on Tool Wear Reduction in Machining of Hard-to-Cut Materials
ZAHRA MORADI1
1) Department of Mechanical Engineering, Islamic Azad University, Najaf Abad Branch, Najaf Abad, Iran
IOI Code
:
ABEB-ACZFHH
Publication :
4th International Conference on Recent Advances in Engineering, Innovation and Technology - Belgium(eitconf.com)
Abstract :
This research was conducted with the aim of comprehensively investigating and analyzing the mutual effects of Minimum Quantity Lubrication (MQL) on tool wear behavior and surface quality in the hard turning process of alloy steels. Given the thermal and tribological challenges in machining hard materials, this study utilizes an experimental-analytical approach based on Design of Experiments (DOE) and Response Surface Methodology (RSM) to analyze the effects of cutting speed, feed rate, and lubrication system. The results obtained from Analysis of Variance (ANOVA) demonstrated that cutting speed and the lubrication system are the most decisive factors influencing tool wear rate and surface quality. Empirical findings and microscopic analyses (SEM/EDS) indicate that under dry machining conditions, the extremely high temperature of the cutting zone leads to intensified adhesive wear and the chemical diffusion of workpiece elements into the tool edge; whereas the use of the MQL system, by creating a thin lubricant film at the tool-chip interface, significantly reduces cutting forces (Ff, Fr, Fc), substantially lowers the cutting zone temperature, and prevents thermal tool degradation. The results showed that the MQL system can reduce the tool wear rate by up to 60% compared to the dry state, while simultaneously improving surface quality by controlling Built-Up Edge (BUE). Furthermore, the mathematical model developed in this research, with a high prediction accuracy of over 94% (error of less than 6%), provides a reliable tool for optimizing process parameters. This research proves that the MQL strategy is not only an environmentally friendly solution for reducing cutting fluid consumption but also a key technical solution for enhancing tool life and achieving desired surface quality in advanced manufacturing industries.
Keywords : tool wear hard materials microscopic analysis lubrication mql