Seismic Performance Evaluation of Buckling-Restrained Bracing Systems with Lower Grade Steel Core Based on Pushover Analysis
Seismic Performance Evaluation of Buckling-Restrained Bracing Systems with Lower Grade Steel Core Based on Pushover Analysis
Mahmoud Goli1 Morteza Aram2 Navid Rahimizadeh3 Sepehr Ahmadnezhad4 Hojatollah SHarifi soraki5 Yousef Hosseini6
1) M.Sc. in Earthquake Engineering, Sadra University, Tehran, Iran,
2) 2. M.Sc student in civil engineering, geotechnical department, Shahid Beheshti University, Tehran, Iran
3) M.Sc. student in Earthquake Engineering, Ferdowsi University of Mashhad, Iran
4) Bachelor of Civil Engineering, Shiraz University, Iran
5) M.Sc. in Safe Structures, Malek Ashtar University, Tehran, Iran
6) M.Sc. student in Structural Engineering, Estahban Azad University, Iran
IOI Code
:
ABZE-ABGBFE
Publication :
5th International Congress on Civil Engineering, Architecture, Building Materials and Environment(caucong.com)
Abstract :
Nonlinear dynamic analysis methods are very time-consuming and require consideration of a set of ground excitations and have their own complexities, but nonlinear static analysis methods can be considered a suitable option for evaluating the seismic performance of structures. The conventional push-over method, as the first and simplest nonlinear static analysis method, has been able to occupy a good position in the last few years among different methods. The aim of this research is to investigate the behavior of buckling braces with a mild steel core and structural steel. For this purpose, three 4-, 8- and 12-story structures with buckling braces were designed based on valid codes and all seismic criteria were also controlled. Then, a two-dimensional frame of them was examined and then the results of nonlinear static analysis in two cases of braces with a mild steel core and structural steel were compared. The results of nonlinear static analysis indicate that energy absorption and initial stiffness are higher in mild steel models, and also that the ductility of mild steel frames is higher due to the number and process of plastic joint formation in the models.
Keywords : buckling brace lower grade steel energy absorption nonlinear static analysis ductility