Comparative Analysis and Performance Enhancement of FinFET-Based Differential Amplifiers for High-Speed Telecommunication Systems

Comparative Analysis and Performance Enhancement of FinFET-Based Differential Amplifiers for High-Speed Telecommunication Systems

Mahdieh shayesteh nia1 Mohana Lalli2 Arash Azizpor3 Pourya Ahmadi Amirabadi4

1) Department of Engineering Physics, Ayatollah Boroujerdi University, Lorestan, Iran Email:
2) Department of Engineering Physics, Ayatollah Boroujerdi University, Lorestan, Iran Email:
3) Department of Electrical Engineering, National Skills University No. 2, Kermanshah,Iran ،Email:
4) Department of Electrical Engineering, Razi University,Kermanshah,Iran, Email:

IOI Code : ACCA-ACZBEH
Publication : 4th International Congress on Science, engineering & New Technologies(secongress.com)
Abstract :
    As semiconductor technology advances beyond the 22nm node, planar MOSFETs suffer from severe short-channel effects (SCE), excessive subthreshold leakage, and drain-induced barrier lowering (DIBL). FinFET technology—a 3D multi-gate architecture—has emerged as the dominant device structure to mitigate these scaling challenges, offering superior electrostatic channel control, higher transconductance efficiency (g_m/I_D), and reduced parasitic leakage currents. Differential amplifiers serve as fundamental building blocks in high-speed analog and mixed-signal integrated circuits, including SERDES transceivers, phase-locked loops (PLLs), and optical receiver front-ends. This paper presents a detailed comparative analysis of the performance of differential amplifiers based on conventional planar CMOS and FinFET technologies (at nodes below 14 nm) in high-speed telecommunication environments. Furthermore, key performance-enhancement techniques—specifically cross-coupled capacitive neutralization, body-bias tuning, and negative-resistance load boosting—are examined to address inherent FinFET limitations, such as width quantization and parasitic gate capacitance. Cadence SPECTRE simulation results at 14nm and 7nm technology nodes demonstrate that optimized FinFET differential pairs—compared to 28nm planar implementations operating at a 1.0V supply voltage—achieve up to a 42% increase in gain-bandwidth product (GBW), a 15 dB improvement in common-mode rejection ratio (CMRR), and a 28% reduction in power dissipation.

Keywords : finfet technology differential amplifier short channel effects (sce) gain bandwidth product (gbw) common mode rejection ratio (cmrr) transconductance efficiency (g m/i d) capacitive neutralization