Experimental Investigation of High-Strength Concrete ‎Using Urmia Local Materials

Experimental Investigation of High-Strength Concrete ‎Using Urmia Local Materials

Amirhossein Arman1 Ayda Kazemi Motlagh2 Erfan Shafei3 Mohammad reza Saei4

1) ‎1.‎ B.Sc. Student, Department of Civil Engineering, Urmia University of Technology, Iran.
2) ‎2.‎ B.Sc. Student, Department of Civil Engineering, Urmia University of Technology, Iran.
3) ‎3.‎ Associate Professor, Department of Civil Engineering, Urmia University of Technology, Iran.
4) ‎4.‎ Instructor, Department of Civil Engineering, Urmia University of Technology, Iran.

IOI Code : AZAE-AAAGCA
Publication : 4th International Congress on Civil Engineering, Architecture, Building Materials and Environment(caucong.com/4th)
Abstract :
    This research seeks to introduce high-strength concrete ‎(HSC) ‎using Urmia local materials ‎‎(ULMs) in the aspects generally expected from this type of concrete volume unit. HSC is a ‎type of concrete whose 28-day characteristic unconfined compressive strength ‎(UCS) is ‎more than 40 MPa. The strength of normal-strength concrete (NSC) is between 21 and 40 ‎MPa. Experimental investigation shows that in many cases, the properties and ‎microstructure of concrete with a UCS of more than 40 MPa are different from NSC. For ‎this purpose, a total of 28 samples were made in 4 mixing designs with different ‎cement ‎ratios‎‏ ‏and 0.35 water-to-cement ratio (W/C) and fixed aggregate consumption for ‎UCS ‎tests were ‎conducted ‎on 50 mm cubic samples at 7, 14, ‎and 28 days of curing. Before the ‎test date, samples were prepared under standardized ‎conditions ‎‎and cured in a tank with ‎limewater saturated at 23±1C°.‎ Under the standard, the average of two samples ‎calculated the UCS value for each ‎‎day test. The ‎results show that HSC can be made by ‎using ULMs. The highest UCS was related to the 28-day strength of the UL-04 mixing ‎design with ‎the highest amount of cement used (600 kg/m3), around 65 Mpa. The findings ‎of the present research ‎show that the UCS of concrete increases with the increase in ‎curing time ‎and the amount of cement used under standard conditions, under the W/C ‎and ‎aggregate fixed.‎ In this research, the investigation possibility of producing HSC using ULMs ‎shows favorable mechanical properties and at the same time provides a sustainable ‎alternative for making HSC, which brings economic benefits and reduces environmental ‎disadvantages such as CO2 global emissions caused by the transportation of materials.‎

Keywords : high strength concrete (hsc) compressive strength‎ cement content economic concrete ‎urmia local materials