Investigation of the Effect of CFRP Sheet Position on Plastic Strain Distribution and Failure Pattern in Hollow Reinforced Concrete Beams under Torsional Loading
Investigation of the Effect of CFRP Sheet Position on Plastic Strain Distribution and Failure Pattern in Hollow Reinforced Concrete Beams under Torsional Loading
Babak Alinejad1 Saeed Mohammadi2
1) Assisstant Professor of department of engineering, University of Maragheh, Maragheh, Iran.
2) Master’s graduate in Structural Engineering, University of Maragheh, Maragheh, Iran
IOI Code
:
AACZ-ABHCZF
Publication :
The 5th International Conference on Seismic Retrofitting(5icst.ir)
Abstract :
Torsional loading in reinforced concrete beams with non-circular cross-sections, due to the development of diagonal tensile stresses and the brittle nature of failure, is considered one of the important issues in the design and strengthening of concrete structures. In recent years, the use of carbon fiber-reinforced polymer (CFRP) sheets as an effective strengthening method has attracted researchers’ attention for improving the performance of these members under torsional loads. Despite numerous studies on increasing the torsional capacity of reinforced concrete beams, the role of CFRP sheet placement in the distribution of damage and the propagation of plastic strain has not yet been comprehensively and systematically investigated. In this study, the behavior of seven reinforced concrete hollow-core beam specimens with square and circular cross-sections under torsional loading was evaluated using the finite element method in ABAQUS software. To examine the effect of strengthening configuration, four different scenarios were considered: CFRP sheets installed at the beam ends, at the midspan region, as full-length wrapping, and in a combined arrangement at three locations. The results were compared with each other. The analysis results indicate that the specimens strengthened at the beam ends and at the midspan region, despite achieving nearly identical ultimate capacities (about 28 kN·m), exhibit different behavior in terms of plastic strain distribution. In the end-strengthened configuration, plastic strain spreads over a larger portion of the beam length, and the damage distribution is more uniform compared to other cases. In contrast, full-length wrapping and the combined arrangement lead to a 7.14% reduction in capacity compared to the first two scenarios, respectively. Based on the obtained results, guidelines are provided for selecting the appropriate CFRP sheet placement according to different design objectives, such as maximizing torsional capacity, controlling crack propagation, or reducing construction costs. The findings of this study show that evaluating strengthening methods should not be limited only to the ultimate capacity of the member; instead, the failure pattern and damage distribution are also key factors in selecting an appropriate strengthening strategy for reinforced concrete structures under torsional loading.