Finite Element Method-Based Evaluation of Stress Distribution and Safety Factor in Cycloidal Gearboxes with Titanium Shafts
Finite Element Method-Based Evaluation of Stress Distribution and Safety Factor in Cycloidal Gearboxes with Titanium Shafts
Alireza Baghdadi1 Banafsheh Karbakhsh2
1) Master s Student, Faculty of Mechanical Engineering, Islamic Azad University, Karaj Branch -
2) Assistant Professor, Department of Mechanical Engineering, Faculty of Engineering, Islamic Azad University, Karaj Branch, Karaj, Iran.
IOI Code
:
AADK-AAKEHB
Publication :
3rd International Congress on Science, engineering & New Technologies(secongress.com/3rd)
Abstract :
In this study, to optimize lightweight and high-efficiency automatic gearboxes, a cycloidal prototype was designed and analyzed using a three-dimensional finite element method (FEM). The model was simulated under a torque of 100 N·mm with realistic boundary constraints. Two material configurations were evaluated: in the first configuration, the gears and the shaft beneath the bearing were made of alloy steel, while the other components were aluminum. In the second configuration, the shaft beneath the bearing was made of titanium, the gears were steel, and the lighter components were aluminum. The evaluation was based on the Von Mises stress, deformation, and safety factor indices.
The results showed that in the first configuration, the maximum stress reached 600 MPa with a safety factor of 0.7, indicating a higher risk of failure. In contrast, replacing the shaft with titanium in the second configuration reduced the maximum stress to 350 MPa and improved the safety factor to 2.4. Although tooth deformation slightly increased, it remained within the acceptable range. Experimental tests confirmed the numerical results with a deviation of 10–14%. Overall, the second configuration, due to its reduced critical stress, enhanced safety, and favorable strength-to-weight ratio, can be considered an optimal choice for automotive, robotic, and aerospace applications.
Keywords : optimization automatic gearbox lightweight and high strength materials stress analysis deformation ansys solidworks cycloidal gear