Investigation of the Synergistic Effect of Beeswax on the Self-Healing and Corrosion Protection of Wax-Based Primer Coatings on Steel
Investigation of the Synergistic Effect of Beeswax on the Self-Healing and Corrosion Protection of Wax-Based Primer Coatings on Steel
reza mahmoudi1 sead rastegari2 hossin haghajani3 mohsen hajiabasi4
IOI Code
:
AAGF-ABCECG
Publication :
9th International Conference on Applied Researches in Science & Engineering (carseconf.com/9th)
Abstract :
In this study, the synergistic effect of adding 20 wt.% beeswax to a wax-based primer coating on the corrosion protection and self-healing behavior of steel in 3.5% NaCl solution was investigated using electrochemical impedance spectroscopy (EIS) and Tafel polarization techniques. Four different sample conditions were prepared and compared: uncoated steel (samples 02 and 03), steel with intact primer coating (samples 05 and 06), steel with primer coating containing a 1-cm artificial scratch (samples 07 and 08), and steel with a beeswax/primer composite coating containing the same scratch (samples 11 and 12). EIS data were analyzed using complex impedance relationships and fitted with appropriate equivalent circuit models for intact and scratched coatings. Key parameters, including charge transfer resistance (Rct), constant phase element parameters (Q and n), and time constants (τ), were extracted. The results showed that the addition of beeswax significantly enhanced corrosion resistance, with Rct increasing from 10,400 Ω in the scratched sample without beeswax to 1,013,400 Ω in the beeswax-containing sample (approximately 97-fold). The high-frequency phase angle for the beeswax sample reached –87.57°, indicating near-ideal capacitive behavior. The n value increased from 0.65 to 0.88, reflecting greater surface uniformity and reduced roughness in the scratched region. The effective capacitance (Ceff) decreased from 92 to 15 μF/cm² (an 84% reduction), indicating a smaller active surface area exposed to corrosion. The time constant also increased from 0.96 to 15.2 s. Tafel analysis confirmed a substantial reduction in corrosion current density from 8.6 to 2.4 μA/cm² (72% decrease) and corrosion rate from 0.100 to 0.028 mm/year (restoring 78% of protective properties) for the beeswax-modified coating compared to the sample without beeswax. This study demonstrates that beeswax, as a green and sustainable additive, effectively enhances both the protective performance and self-healing capability of wax-based primer coatings, offering a promising strategy for corrosion protection in saline environments.
Keywords : beeswax wax based primer coating electrochemical impedance spectroscopy (eis) self healing corrosion protection tafel polarization