Comparative Evaluation of Strategies for Improving the Seismic Performance of Steel Plate Shear Walls
Comparative Evaluation of Strategies for Improving the Seismic Performance of Steel Plate Shear Walls
Seyyed Behnam Beheshti1 Ali Parvari2 Homa Shafiei3 Mojtaba Gorji Azandariani4 Arash Bayat5
1) Department of Civil Engineering, Khom.C. , Islamic Azad University, Khomein, Iran Email:
2) Assistant Professor, Department of Civil Engineering, Khom.C. , Islamic Azad University, Khomein, Iran Email:
3) Assistant Professor, Department of Civil Engineering, Khom.C. , Islamic Azad University, Khomein, Iran Email:
4) Structural Engineering Division, Faculty of Civil Engineering, Semnan University, Semnan, Iran Email:
5) Assistant Professor, Department of Civil Engineering, University of Hormozgan, Hormozgan, Iran Email:
IOI Code
:
AAHE-ABFGFG
Publication :
National Conference on Civil Engineering, Design and Construction Technologies, Energy, Materials and Advanced Machinery(icaeu.ir)
Abstract :
This study aimed to comparatively evaluate the performance improvement strategies of steel shear walls under cyclic loading. Four configurations including a conventional steel shear wall as the base case, a wall restrained with a double-sided wood panel, and two walls restrained with a wood panel and a steel plate with 4 and 9 grooves were investigated. Performance indices including initial stiffness, ultimate and yield capacity, ductility, dissipated energy, equivalent viscous damping ratio, and failure pattern were extracted from the hysteresis curves and evaluated comparatively. The results showed that adding a double-sided wood panel significantly increased the load-bearing capacity, dissipated energy, and equivalent damping of the system, although it was accompanied by a decrease in the ductility index. In contrast, creating grooves in the steel plate caused a response adjustment, a more uniform behavior after the peak, and an increase in energy dissipation efficiency. Also, increasing the number of grooves from 4 to 9 caused a relative decrease in the ultimate capacity but improved behavior control in larger displacement ranges. Overall, the results indicate that lateral restraint and changing the geometry of the steel plate each have a distinct role in adjusting the performance indicators and can be used purposefully to improve the wheel response of steel shear walls.
Keywords : steel shear wall cyclic performance wooden panel grooved sheet hysteresis behavior