Determination of the efficiency of Hydrocyclones of crushing circuits of Sungun copper condensing plant
Determination of the efficiency of Hydrocyclones of crushing circuits of Sungun copper condensing plant
Yaser Afsharmanesh1 Ali Alizadeh2 Saeid Azizi3 Yousef Azarmivar4
1) PhD student in Economic Geology, Islamic Azad University, North Tehran Branch, Tehran, Iran,
2) PhD in Tectonic Geology, Islamic Azad University, North Tehran Branch, Tehran, Iran,
3) Master of Mining Engineering, Sungun Copper Mine, Warzghan, Iran,
4) PhD in Management, Zamin Kavan Co, Ahar, Iran,
IOI Code
:
ABEB-ABHGAA
Publication :
4th International Conference on Recent Advances in Engineering, Innovation and Technology - Belgium(eitconf.com)
Abstract :
The present research was conducted in order to determine the efficiency of hydrocyclones of crushing circuits of Sungun copper concentration plant. In this regard, after collecting the initial information, the necessary sampling of the feed flow, overflow and bottom of the hydrocyclone, as well as the output of the ball mills, were done, then the results of the samples were analyzed and processed with the design data. Considering the results obtained from the tests and analyzes that were done on the efficiency of ball mills in different tonnages, it can be said that the efficiency of mills is lower in low tonnage. One of the main factors of the low efficiency of the mills and the low crushing ratio for different tonnages is the fineness of the mill feed. Also, the reason for the large decrease in efficiency in low tonnages (hard load) compared to soft load is the low percentage of bullet filling in Asia. The low percentage of bullet accumulation in high tonnages also affects the efficiency, but this effect is due to the softness of the materials of Kamner than the hard tonnage. The large size of the pellets compared to the fact that the load entering the pellet mill is small is also another factor in the low efficiency of the mill. Also, with the decrease in tonnage, the efficiency of ball mills also decreased, so that in the tonnage of 1050 tons per hour, the efficiency of mills 1 and 2 was 49.80 and 73%, respectively, and in the tonnage of 570, the efficiency was 45.95 and 48.60%. Finally, according to the operational conditions of hydrocyclones and the corrected separation limit values, which were obtained in sampling as 99, 103, 69, 109, and 69 microns, respectively, it can be concluded that hydrocyclones work mostly with a lower separation limit theoretically, the causes of which can be called the finer feed of hydrocyclones, the reduction of the solid weight percentage of the feed, and the possible corrosion of the cyclone overflow outlet. Especially in lower tonnages, the separation limit becomes much lower, which is due to the decrease in the flow rate of materials entering the cyclone.
Keywords : hydrocyclones crushing circuits input feed condensing the sungun copper mine north west of iran