Comparison of local instability in steel sections flange under single and double tension loading

Comparison of local instability in steel sections flange under single and double tension loading

Nima Fakhar Hasani1 Yousef Hosseinzadeh2

1) Ph.D. Student in Structural Engineering, Faculty of Civil Engineering, University of Tabriz, Tabriz, Iran
2) Professor, Faculty of Civil Engineering, University of Tabriz, Tabriz, Iran

IOI Code : ABZE-ABFZCZ
Publication : 5th International Congress on Civil Engineering, Architecture, Building Materials and Environment(caucong.com)
Abstract :
    According to Section J10 of the AISC 360-22 specification, it is necessary to check the web and flange stability of steel members under single and double compressive concentrated loads, as well as single tensile concentrated loads. This paper investigates the capacity of steel sections under double tensile loads and compares it with the single tension case in the specification. First, a finite element model was developed to study the behavior of steel members under concentrated tensile loads, and its accuracy was validated using experimental data. Subsequently, the behavior of eight specimens including four IPE sections and four IPB sections under concentrated tensile loading was examined. The finite element analysis results for steel sections under single and double tension were compared. The results indicate that the capacity of specimens under double tension loading is between 2.20% and 13.68% lower than that of specimens under single tension, and that local stability control of steel sections under double tension is also necessary. Furthermore, the relationship for local flange bending is conservative, ranging between 41% and 73% of the actual capacity of the steel members.

Keywords : concentrated load local instability double tension loading flange local bending finite element model