Chemical activation of steelmaking blast furnace slag and its use as an additive in cement and improvement of the quality of produced concrete
Chemical activation of steelmaking blast furnace slag and its use as an additive in cement and improvement of the quality of produced concrete
Masoud Nayebli1 Mostafa Afzali2 Mostafa Pakniya3 Parisa ghadimi4 Soheila Ghaeeni5
1) Quality Control Manager, Momtazhan Cement Company, Kerman
2) Civil Engineer, Quality Control Manager, Kerman City Concrete Builders Cooperative Company, Iran
3) Physics Laboratory Expert, Momtazhan Cement Company, Kerman
4) Chemistry Laboratory Expert, Momtazhan Cement Company, Kerman
5) Master of Science in Nanochemistry, Laboratory Expert, Kerman Concrete Cooperative Company, Iran
IOI Code
:
ABZE-ABHGFC
Publication :
5th International Congress on Civil Engineering, Architecture, Building Materials and Environment(caucong.com)
Abstract :
Today, the use of cements blended with blast furnace slag (GBFS) is considered as a key approach to reduce greenhouse gas emissions in the cement industry and produce products with higher durability. However, the main challenge of these cements is the lower strength at early ages due to the slow activation of the slag. This paper examines two complementary strategies to optimize the performance of these cements: First, to investigate the effect of a new activating additive (Additive A) added to slag cement during the final grinding stage, and second, to analyze the role of chemical phases and composition of different slags on short-term and long-term strengths. For this purpose, laboratory cement samples were made with and without Additive A and their physical and mechanical properties were evaluated.Next, the performance of these cements in concrete with a fixed mix design and the effect of the type of slag cement (with different chemical analysis) on compressive strength at ages of 7, 28 and 90 days were studied. The results showed that Admixture A, by accelerating slag hydration through the creation of a local alkaline environment, reduced the setting time and improved the initial compressive strength (3 and 7 days) of cement mortar and concrete by 25%.Also, in the study of different blended cements, it was found that higher C2S phase in cement leads to higher long-term strengths (90 days) and the amount of SO3 in slag also plays an effective role in the development of early strength. The combination of these two approaches, namely the use of an activating additive and optimal selection of slag, can produce blended cements with performance comparable to pure Portland cement at all ages.
Keywords : slag cement activator admixture compressive strength hydration chemical phases of cement concrete durability