Optimization of location and characteristics of viscous dampers in tall structures subjected to earthquakes

Optimization of location and characteristics of viscous dampers in tall structures subjected to earthquakes

Davoudi azad Hosein1

1) Faculty member, Faculty of Technology Development and Entrepreneurship, Islamic Azad University, Karaj Branch

IOI Code : ABZE-ABHHDG
Publication : 5th International Congress on Civil Engineering, Architecture, Building Materials and Environment(caucong.com)
Abstract :
    In this study, the optimization of the distribution and technical specifications of viscous dampers in tall structures (10 to 20 stories) has been studied with the aim of improving the seismic performance under earthquake excitations. The design variables include the number, location in height, and damping coefficient of the control devices, and the objective functions are defined based on the simultaneous reduction of roof displacement, interstory drift, and floor acceleration. To solve this nonlinear and complex optimization problem, a computational platform in MATLAB environment was developed and the performance of three metaheuristic algorithms PSO, GA, and NSGA-II was compared with each other.The results of the time history dynamic analysis showed that the use of the optimal viscous damper system resulted in a 35 to 50 percent reduction in the maximum roof displacement and interstory drift control within the permissible limits of the regulations. Also, the results indicate that the non-uniform and targeted distribution of dampers in the height of the structure increases the efficiency of the system by 15 percent compared to the uniform distribution. In the evaluation of the algorithms, the PSO algorithm with a much higher convergence speed (about 40 percent faster than the GA) succeeded in extracting more optimal solutions with a smaller objective function value, while the NSGA-II algorithm provided a wider Pareto front for decision-making in multi-objective problems.This research shows that by utilizing computational intelligence, an economical and safe design can be achieved for the retrofitting of tall structures that, in addition to structural stability, can modulate the acceleration of floors to protect non-structural components by up to 25%.

Keywords : structural optimization viscous damper particle colony optimization genetic algorithm seismic response tall structures interstory drift