Numerical Evaluation of Seismic Performance and Cyclic Behavior of Steel Frames Equipped with Buckling-Braces (BRB) Compared to Convergent Braced Frames (CBF)

Numerical Evaluation of Seismic Performance and Cyclic Behavior of Steel Frames Equipped with Buckling-Braces (BRB) Compared to Convergent Braced Frames (CBF)

mohsen parsa1

1) PhD Student in Civil Engineering - Structural Engineerng, Faculty of Engineering and Technoligy, Islamic Azad University , Semnan Branch ,

IOI Code : ACDK-ABKKHG
Publication : 4th International Conference Civil Engineering, Architecture and Urban Planning(4cau.ir)
Abstract :
    Convergent braced frames (CBF) suffer from severe resistance loss, stiffness degradation, and energy dissipation capacity reduction during alternating earthquake cycles due to compressive buckling of the brace members. In contrast, buckling-brace (BRB) frames, by enclosing the yielding steel core in a mortar-filled sheath and incorporating a separating layer, allow for symmetrical yielding of the core in both tension and compression modes without buckling. In the present study, the cyclic behavior and seismic response of a 6-story steel frame equipped with BRB and CBF were numerically investigated in OpenSees software. The finite element model was validated based on the laboratory results of Black et al. (2002) and calibrated with an error of less than 4%. Then, nonlinear static (incremental) and nonlinear time history dynamic analyses were performed under near- and far-field accelerograms. The results showed that the BRB system, compared to CBF, increased the behavior coefficient (R) by 38%, reduced the residual displacement by 31.4%, and reduced the interstory drift by 38%, and created a more uniform distribution of inelastic damage in the height of the structure.

Keywords : buckling brace (brb) convergent brace frame (cbf) nonlinear time history analysis hysteretic energy dissipation seismic ductility