Investigation of Vibrational Probability of Composite Ceilings using Monte Carlo simulation method
Investigation of Vibrational Probability of Composite Ceilings using Monte Carlo simulation method
Ali Nazari1 Siamak Golnargesi2
1) M.Sc. student, Facultyof Civil Engineering and environment, Khavaran Institute of Higher Education,
2) Assistant Professor,Facultyof Civil Engineering and environment, Khavaran Institute of Higher Education,
IOI Code
:
XAAG-BKHHC
Publication :
The 5th International Congress On Civil Engineering, Architecture & Urban Development(5icsau.com)
Abstract :
In recent years, the use of probabilistic analyzes has expanded. One of the most important and most widely used methods is probabilistic analysis using the Monte Carlo simulation method. On the other hand, composite ceilings are the roofs which are very sensitive to vibration due to light weight and low damping of the structural system, as well as the large gap between the joists and the dynamic loads. In this research, the probability of composite vibrations is investigated. The probabilistic analysis of RT software has been used. The probability of failure in terms of vibration is determined according to the criteria set forth in Section 10 of the National Building Regulations. For this purpose, a composite roof beam of a 5-story residential building in Mashhad has been considered as a case study. Then, four parameters of concrete strength, specific gravity concrete, concrete slab thickness and live load on the ceiling are considered as random variables. Of each variable, one million, ten million and one hundred million samples are simulated by the Monte Carlo method using the RT software. Also, dispersion coefficients are considered in five different states. Then, the probability of failure and the safety index are derived from two extreme state functions (one based on the criterion of the tenth topic of the national regulations and the other based on a predictive analysis). The results show that the least probability of failure is for the first-order mode function and the first-order dispersion coefficients, and for one million simulations of nearly 31% and its safety index is 0.49.
Keywords : probabilistic analysis probability failure simulation monte carlo