Investigation the flexibility of the screw connection sheet in steel structures under the influence of tensile and compressive stresses
Investigation the flexibility of the screw connection sheet in steel structures under the influence of tensile and compressive stresses
Saed Habibzadeh1 Vahid saberi2 Hamid Saberi3 amin moshtagh4
1) Graduate student of Structural Engineering, University of Eyvanekey, Semnan, Iran
2) Assistant Professor, Department of Civil Engineering, University of Eyvanekey, Semnan, Iran
3) Assistant Professor, Department of Civil Engineering, University of Eyvanekey, Semnan, Iran
4) Civil engineering faculty, University of Garmsar, Semnan, Iran
IOI Code
:
XACA-CZHCH
Publication :
2.nd International Congress on Contemporary in Civil Engineering, Architecture and Urban Development - Dubai(2dubaiconf.com)
Abstract :
The design of the structure to counter the earthquake force in the screw connections should provide the necessary degree of flexibility. In conventional structures, the ductility by depreciation residual energy is provided, which is the result of non-elastic deformation of members and joints. For example a combination of a friction-resistant bolt with a Beans shaped hole creates a damper model that increases the flexibility of connection. Today, the use of end-plate screw connection has been boosted by ease of operation and proper seismic performance, and many researchers have investigated these connections. In this paper the connecting sheet with a hole which has a geometric combination circular perforation with a rectangular cross-sectional hole is modeled as 8 samples with different angel of the screw hole cavity and by Abaqus finite element software was modeled. After analyzing the models under tensile and compressive forces the behavior of sheets under the influence of compressive and tensile stresses and deformations and displacements were investigated. The results indicate that the Axis2-T sample with a 35.5 degree angle in the tensile state and the Axis1- P sample with a 90 degree compression condition has a better flexibility response according to the review of tensile and compressive stresses and the displacement of the plate element connection.
Keywords : flexibility screw connections finite element method compressive stress tensile stress