Comparison of the Effect of Heterocyclic Phosphate and Mineral and Nucleating agents on the Physical and Mechanical Properties of Processed Polypropylene R60

Comparison of the Effect of Heterocyclic Phosphate and Mineral and Nucleating agents on the Physical and Mechanical Properties of Processed Polypropylene R60

Ehsan Salarvand1 Abolfazl Barati2 Ehsan Soury3 Davood Soudbar4

1) Student of Polymer Engineering, Arak University. Email:
2) Assosiate Professor of Department Chemical Engineering, Arak University. Email:
3) Assistant Professor of Department Mechanical Engineering, Arak University. Email:
4) Assistant Professor of Research and Development Unit, Shazand Petrochemical Complex. Email:

IOI Code : XACC-DBBCF
Publication : germanconf.com(germanconf.com/2nd)
Abstract :
    Polypropylene is highly regarded by researchers and industry because of its affordable price and the ability to offer a wide range of mechanical properties due to its combination with different materials. Extensive research has been carried out on a polypropylene composite containing inorganic particles of varying amounts. In this study, the effect of different amounts of sodium 2,2’-methylene-bis (4,6-di-tert-butylphenyl) phosphate NA_11 and talc on the physical and mechanical properties of polypropylene R60 in a Co-rotating twin screw extruder with the fusion method have been studied with the purpose of increase in the temperature of crystallinity and the improvement of physical and mechanical properties. To investigate the effect of Add-ons on crystallinity, a differential scanning calorimetry (DSC) was performed for the samples. By the use of X-ray diffraction (XRD) technique, the peaks intensity of the alpha and beta phase was investigated before and after the mixing. The mechanical properties of the samples were also inspected to complete the studies. The results showed that the increase in crystalline temperature was directly related to the increase in the nucleating agent, and the crystallinity percentage of the samples with the enhancement up to 3000 ppm of the NA-11 nucleating agent increased and then decreased. Also, the increase in the amount of talc filler to the composition of the composite have increased the temperature and crystallinity, and improved physical mechanical properties. Comparing the results showed that, when the NA-11 nucleating agent was added to the polypropylene powder, the physical-mechanical properties increased, but comparing to when the composition of talc and NA-11 were added to polypropylene, this increase was lower.

Keywords : polypropylene nuclear agent na 11 talc physical mechanical properties