Solar Greenhouse desalinition Condenser Modeling with humidification-dehumidification Process
Solar Greenhouse desalinition Condenser Modeling with humidification-dehumidification Process
seyed mohamad javad hosseini1
1) University of
IOI Code
:
XAFE-CHDAF
Publication :
1st national conference in mechanical engineering(mechconf.com)
Abstract :
Due to lack of groundwater resources and water crisis in different parts of Iran, as well as the wrong method of irrigation of agricultural products, recent studies have been conducted on independent greenhouse reservoirs. The system supplies its own energy and water with the help of sunlight and generally absorbs co2, as well as fresh water and agricultural produce.
In desalination, such system uses a humidifiers-dehumidifier (HD) that eliminates the need for irrigation. The HD process is based on the principle that the portability of the vapor through an impenetrable fluid, such as air, increases with increasing fluid temperature, and the moisture and humidity of the fluid can be performed by desalination process. The HD unit usually works under atmospheric condition and has three main parts: heat source, evaporator and condenser are the major parts.
One of the most important parts of the desalination process is the condenser of the device. In this study, after investigating the process of producing freshwater by choosing the flow through the open air cycle with water heating, we use various processes of dehumidification in the condenser.The condenser as a two way-flow heat exchanger is modeled in interaction with the initial flow, one of which has a mass exchanger. The LMTD method is used to calculate the average mass transfer forces for mass transfer. In the equations and details described, it is assumed that the desired device is a condenser, but this model can be implemented alike (as long as careful attention is given to the parameters) in the case of an operator.
Keywords : desalinition humidifier humidifier greenhouse condenser