In vitro study of adhesion strength between fiber concrete Polypropylene with ribbed steel rod with three diameters tested Pull-out Test
In vitro study of adhesion strength between fiber concrete Polypropylene with ribbed steel rod with three diameters tested Pull-out Test
Seyedmohammad Mousavikhatir1 Hamidreza Nasrollahnejadghomi2
1) Sama Technical and Vocational School, Islamic Azad University, Babol Branch, Babol, Iran Moderator of Sama Babol Technical College, MSc in Structural Engineering, Department of Civil Engineering
2) Non-profit Non-profit Higher Education Institute Allameh Tabarsi, Ghaemshahr. Master of Structures
IOI Code
:
XBDG-ECBCF
Publication :
The 6th national Congress On Civil Engineering, Architecture & Urban Development(6icsau.ir)
Abstract :
Investigating the adhesion between the bars and the concrete surface is a time when concrete laboratories have opened the way for further research. Polypropylene fibers are used as an additive to reinforce a variety of concrete and cement and gypsum mixtures. Consumption of polypropylene fibers increases flexural, tensile, shear and wear resistance of fiber concrete. In this experiment, in vitro evaluation of Bond Strength with respect to the interaction between the surface of ribbed steel rebar with different diameters and polypropylene fiber concrete was performed by testing the rebar elongation with diameters of 8, 10 and 12 mm from 6 cylindrical specimens. 150 × 300 mm was performed in the laboratory. Two specimens were made per diameter and after 28 days of processing, rebar elongation test was performed. The results showed that the adhesion strength of steel bars and polypropylene fiber concrete was higher than the bond strength of steel bars with ordinary concrete. Also, as the rebar diameter increased, the adhesion strength between polypropylene fiber concrete and steel bars decreased by 0.18%.
Keywords : extrusion polypropylene fiber concrete ribbed steel rebar adhesion strength cylindrical specimen