In vitro study of adhesion strength between ordinary concrete with three-diameter non-tread steel rebar under tensile test (Pull-out Test)

In vitro study of adhesion strength between ordinary concrete with three-diameter non-tread steel rebar under tensile test (Pull-out Test)

Seyedmohammad Mousavikhatir1 Omidreza Amirsoleimani2

1) Sama Technical and Vocational School, Islamic Azad University, Babol Branch, Babol, Iran Moderator of Sama Babol Technical College, MSc in Structural Engineering, Department of Civil Engineering
2) Institute of Nonprofit Higher Education Allameh Tabarasi, Ghaemshahr, MSc in Construction Management

IOI Code : XBDG-ECBDD
Publication : The 6th national Congress On Civil Engineering, Architecture & Urban Development(6icsau.ir)
Abstract :
    With the advent of science and the advent of many technologies in the last century, the knowledge of concrete and its properties has also grown considerably, so that today we are witnessing the application of different types of concrete with different materials, each with its own properties and applications. It has. In this experiment, an in vitro evaluation of Bond Strength with respect to the interplay between the surface of steel without rebar with different diameters and ordinary concrete was carried out by the test of extrusion of rebar with diameters of 8, 10 and 12 mm from 6 cylindrical specimens 300 × 150 mm in the laboratory. Two specimens were made per diameter and after 28 days of processing, rebar elongation test was performed. The results showed that the adhesion strength of non-tread steel and non-concrete reinforced concrete bars was much lower than the adhesion strength of tread steel reinforced concrete. Also, with the increase in rebar diameter, the adhesion strength between ordinary concrete and non-tread steel bars decreased by 0.23%.

Keywords : extrusion polypropylene fiber concrete tread steel rebar laboratory assessment rebar diameter