In vitro study of adhesion strength between metallic fiber reinforced concrete with three-diameter steel rebar under extrusion test (Pull-out Test)

In vitro study of adhesion strength between metallic fiber reinforced concrete with three-diameter steel rebar under extrusion test (Pull-out Test)

Seyedmohammad Mousavikhatir1 Farshid Mohammadalizadehdarzi2 Mohsen Ahmadi3

1) Sama Technical and Vocational School, Islamic Azad University, Babol Branch, Babol, Iran Moderator of Sama Babol Technical College, MSc in Structural Engineering, Department of Civil Engineering
2) Sama Technical and Vocational School, Islamic Azad University, Babol Branch, Babol, Iran, Student of Civil Engineering
3) Sama Technical and Vocational School, Islamic Azad University, Babol Branch, Babol, Iran Faculty Member of Sama Babol Technical and Vocational School

IOI Code : XBDG-ECBDF
Publication : The 6th national Congress On Civil Engineering, Architecture & Urban Development(6icsau.ir)
Abstract :
    Manufacture of metal fiber concrete as a new technology in the construction industry. Concrete and reinforcing metal fibers are among the new materials that have a special place in construction. These materials improve the desired properties of concrete, such as its toughness, and in some cases reduce the weight of the concrete, making lightweight materials available to engineers. In this experiment, an in vitro evaluation of Bond Strength with respect to the interaction between the surface of the Tread steel rebar with different diameters and the metal fiber concrete was carried out by the test of tensile extrusion with diameters of 8, 10 and 12 mm from 6 cylindrical specimens. 150 300 300 mm was performed in the laboratory. Two specimens were made per diameter and after 28 days of processing, rebar elongation test was performed. The results showed that the adhesion strength of the steel bars without tile and metallic fiber concrete was lower than the tensile strength of the tile steel bars with self-compacting concrete. Also, with increasing the diameter of the rebar, the adhesion resistance between metal fiber concrete and non-tin steel bars decreased by 0.11%.

Keywords : extrusion metallic fiber concrete tread steel rebar new technology adhesion resistance