Investigating and studying the adhesion strength between ordinary concrete with triangular steel rebar with three diameters under Pull-out test
Investigating and studying the adhesion strength between ordinary concrete with triangular steel rebar with three diameters under Pull-out test
Seyedmohammad Mousavikhatir1 Amirhossein Basir2
1) Sama technical and vocational training college , Islamic Azad University , Babol Branch , Babol , Iran Senior Lecturer structure, Civil Engineer Email:
2) Sama technical and vocational training college , Islamic Azad University , Babol Branch , Babol , Iran Student of civil engineering
IOI Code
:
XBFA-DFHGB
Publication :
3rd International Conference on Applied Research in Structural Engineering and Construction Management(sharifsecm.ir)
Abstract :
Due to the development of science and the emergence of many technologies in the last century, the recognition of concrete and its properties have also been significant developments, so that today we see the use of various types of concrete with different materials, each with its own properties and user Has In this experiment, the Bond Strength Laboratory Evaluation was carried out with regard to the interaction between the surface of the grooved steel fittings with different diameters and ordinary concrete. By testing the retroreflection of the rebar with 8, 10 and 12 mm diameter from 6 cylindrical cylinders 300 × 150 mm in the laboratory. Two specimens were made in each diameter and after 28 days of treatment, a rebound test was performed. The results showed that the adhesion strength of steel and conventional concrete rods is slightly higher than the adhesion strength of steel bars with self-compacting concrete. By increasing the diameter of the rebar, the adhesion strength between ordinary concrete and steel bars decreases by 0.16%.
Keywords : exhaust ordinary concrete ribbed steel rebar adhesion strength curing