Optimization of Insulation Thickness in Cold Climate Residential Buildings; Case Study of Ilam
Optimization of Insulation Thickness in Cold Climate Residential Buildings; Case Study of Ilam
Milad Heiranipour1 Touran Ahmadi2
1) Master of Architecture and Energy, Art University of Tehran
2) Faculty member of Ilam University
IOI Code
:
XCZK-EDACK
Publication :
7th International Conference on Civil, Architectural and Environmental Sciences - Berlin(berlin-conf.com)
Abstract :
One way to prevent energy loss in the building sector is to use thermal insulation. But the extent of the contribution of thermal insulators to solving environmental problems and reducing energy consumption is unclear. The purpose of this study was to investigate the thermal insulation used in Ilam residential buildings and optimize their thickness to obtain the best results. In this regard, to optimize the thickness of the insulation used in the building walls, the model is first simulated without any thermal insulation and is considered as the base model and later in the simulation various thicknesses (from 1 to 10 cm) are simulated. The results were compared with the baseline model. The results show that up to 5 cm thick, the amount of energy consumption reduction is significant. Increasing the thickness from 5 to 10 cm only reduces the energy consumption by 4 kWh, but this increase in thickness increases the cost of insulation and also increases the area of the building wall which has no economic justification. As a result, the best insulation thickness is 5 cm.
Keywords : thickness of insulation residential building ilam city polystyrene insulation