The effect of oyster powder and polypropylene fibers on the performance of 400 degree self-compacting concrete
The effect of oyster powder and polypropylene fibers on the performance of 400 degree self-compacting concrete
seyedrahim Baharavar1 Arazmohammad bahlakegharavi2
1) Assistant Professor of Civil Engineering, Shams Gonbad Institute of Higher Education,
2) Master of Structural Civil Engineering Shams Higher Education Institute
IOI Code
:
XDHE-FKHKB
Publication :
6th.International Conference on Researches in Science & Engineering & 3rd.International Congress on Civil, Architecture and Urbanism in Asia(6icrsie.com)
Abstract :
In this research, we have 5 rows of concrete mixing. In these combinations, the first sample, which is our simple example, no filler or lubricant was used, in the next sample, 6% by weight of naphthalene lubricant cement and in the third sample, 6% lubricant. With 10% oyster powder filler replaced with sand. In Jaharm sample, 6% lubricant with 0.5% polypropylene fibers and in the fifth sample, 6% lubricant with 10% filler and 0.5% fibers in concrete are combined. Compressive strength, flexural strength, water absorption and carbonation tests with slump have been performed on concrete alone. In this research, a total of 60 concrete samples have been prepared, for compressive strength 15 cubic specimens in the dimensions of 15 * 15 * 15 15 specimens of 10 * 20 cylinders for Brazilian shear strength and 15 cubic specimens 10 * 10 * 10 for carbonation and adsorption It has been water. After concreting, the samples were kept in the laboratory at a temperature of 18 ± 2 ° C for 24 hours in molds and then kept in a well with lime. And after 28 days, the mentioned experiments were performed on them according to the relevant standards.