Consolidation and solidification of Electric Arc Furnace dust of Natanz Steel Melting company in concrete and production of concrete building materials
Consolidation and solidification of Electric Arc Furnace dust of Natanz Steel Melting company in concrete and production of concrete building materials
GhorbanAli Dezvareh1 Taghi Ebadi2 Sara Abbasi3 Javad Tavakoli Targhi4
1) Ph.D. in Civil Engineering-Environmental Engineering, Environmental Research Institute of Tarbiat Modares University
2) Associate Professor, Faculty of Civil and Environmental Engineering, Amirkabir University of Technology
3) Master s degree in Civil-Environmental Engineering, Amirkabir University of Technology
4) Manager of Natanz steel melting and Natanz steel factories complex, Natanz, Iran
IOI Code
:
XEFB-HBDKE
Publication :
2nd International Congress on Civil Engineering, Architecture, Building Materials and Environment(caucong.com/2nd)
Abstract :
Iron and steel melting industries and factories around the world produce various wastes. Electric arc furnace dust is one of the important wastes in the steel production process, which is being produced continuously and on a large scale. One of the conventional methods to neutralize this type of waste is stabilization and solidification. In the stabilization and solidification process, the existing wastes are combined using binders such as cement, lime, pozzolan and geopolymer, and thus the waste materials are stabilized and immobilized. Usability for a wide range of different combinations of pollutants, ease of use and economy for large amounts of waste has caused the increasing use of this method in the field of environment. In the current research, dust from electric arc furnace of Zob Ahan Natanz Iron Company was used as the dominant residue for the process of stabilization and solidification in concrete, and considering the application of concrete produced in the industries of block making and street tables, relevant tests were carried out on solidified samples. It should be noted that the mentioned dust has replaced the filler of concrete aggregates. Then, dust with a ratio of 2 to 15 percent by weight of cement replaced the fine-grained part of the aggregates, and after construction, the concrete samples were tested for compressive and bending strength, permeability, and leakage of heavy metal pollutants. The results of the compressive and bending strength tests showed that with the increase in the percentage of dust in concrete, the 7-day resistance of concrete decreases due to the delay in the setting process of concrete in the presence of furnace dust, but we face an increase in the 28-day resistance. According to the dust fine structure, with the increase of its substitution in the aggregate, the permeability also decreased. Thus, increasing the amount of dust has a positive effect in terms of increasing the durability of concrete produced in different environmental conditions. The results of the pollution leakage tests showed that the amount of heavy metal pollutants leakage increases with the increase of dust due to the decrease in pH value.
Keywords : stabilization and solidification electric arc furnace dust steel industry wastes heavy metal leakage