Numerical evaluation of the seismic behavior of steel beams reinforced with carbon polymer fibers in steel frames
Numerical evaluation of the seismic behavior of steel beams reinforced with carbon polymer fibers in steel frames
Mahmoud Hashemi1 Abutaleb Ghaedrahmati2 Masoumeh Zand3 Reza Hashemi4
1) Master s student, Department of Civil Engineering, Islamic Azad University, Aligudarz branch, Aligudarz, Iran
2) Club of Young and Elite Researchers, Borujard Branch, Islamic Azad University, Borujard, Iran
3) Club of Young and Elite Researchers, Borujard Branch, Islamic Azad University, Borujard, Iran
4) Bachelor s degree, Department of Civil Engineering, Islamic Azad University, Durood Branch, Durood, Iran
IOI Code
:
XGFB-KZEDG
Publication :
9th.International Congress On Civil Engineering, Architecture & Urban Development(9icsau.ir)
Abstract :
One of the effective and efficient methods in strengthening steel structures is the use of polymer composite materials reinforced with carbon fibers (CFRP). These sheets, which act as a double reinforcing member, increase the hardness, resistance and formability of the components of carbon steel structures. Therefore, in this research, firstly, to show the effect of strengthening the steel beam with CFRP fibers in the ultimate capacity, the shear force-displacement diagrams before and after strengthening for all samples under the effect of cyclic loading, were drawn and the results were examined. In these samples, CFRP fibers were connected in two ways: connecting to the girder on two sides and connecting to the lower wing of the girder. Then, the effect of web reinforcement on the occurrence of web and wing buckling was investigated. Also, the effect of thickness and length of CFRP fibers were also investigated as other variables. The results showed that the best performance of CFRP fibers for its installation mode on the beam web has occurred considering the longer length, and increasing the thickness of CFRP fibers did not have much effect on increasing the seismic behavior of the beam. The tensile strength of the samples was very similar to each other. The final strength of the samples with CFRP fibers compared to the case without CFRP fibers, in the connection mode on the girder web, had a better performance by 6%, and at high rotation angles, the behavior and shear stiffness of the girder with CFRP fibers increased compared to the simple girder. The out-of-plane buckling in the beam samples with CFRP fibers was properly reduced compared to the simple beam, and in the model without CFRP fibers, the buckling in the lower wing of the beam was also clearly evident, which has improved with the addition of the CFRP fiber layer.
Keywords : steel frame beam retrofitting carbon fibers polymer nonlinear analysis bridge cfrp