Evaluation of the effect of steel and polymer fibers on the compressive, Modulus of Rupture and impact resistance of concrete in rigid pavements

Evaluation of the effect of steel and polymer fibers on the compressive, Modulus of Rupture and impact resistance of concrete in rigid pavements

Vahid Taheri1 Mikaeil Naseri Yalghouzaghaj2 Vahid Sahranavard Kahriz3

1) Department of Civil Engineering, Semnan Branch, Islamic Azad University, Semnan,Iran
2) Department of Civil Engineering, Salmas Branch, Islamic Azad University, Salmas,Iran
3) M.Sc. of Transportation Engineering, Ahar Branch, Islamic Azad University, Ahar,Iran

IOI Code : XKHB-AZCCGZ
Publication : Annual Conference on Hekmat-Based Architecture, Urban Development, Art, Industrial Design, Construction and Technology(icahu.com)
Abstract :
    Concrete pavements are classified as rigid pavements, and today, with the aim of optimizing them in terms of resistance and harmonizing it with the environment, many researches are underway, such as the possibility of using different types of fibers. In this article, a laboratory research focused on the use of polymer and steel fibers in rigid surface concrete is described. For this purpose, compressive, bending and impact strength tests were performed on concrete samples containing 12 mm long polymer fibers and 35 mm long steel fibers, as well as on concrete containing different percentages of the two mentioned types of fibers. The results showed that 1% of steel fibers compared to the volume of concrete increases the compressive strength by about 60% more than polymer fibers and all types of fiber combinations. Meanwhile, 0.5% by volume of composite fibers including 75% by weight of steel fibers and 25% by weight of polymer fibers improves the compressive strength of control samples by 46%. The flexural strength test also showed that 1% by volume of steel fibers adds about 50% to the flexural strength. Carrying out the impact test using the drop weight method also showed that steel fibers, probably because they have less flexibility than polymer fibers, cannot have a significant effect on improving the impact resistance of concrete. Also, if polymer fibers are used, it seems that the length of the fibers should be more than 12 mm so that the resistance of pavement concrete against impact can be expected to increase.

Keywords : concrete pavement polymer fibers steel fibers modulus of rupture impact resistance