Static analysis finger nail bar attached cylindrical rotary tiller
Static analysis finger nail bar attached cylindrical rotary tiller
khald porrasuli1 jala khodaei2
1) Biosystems mechanics graduate student, University kourdestan of Kurdistan
2) Department of Biosystems Mechanics, University of kourdestan Kurdistan
IOI Code
:
XYAA-ZBFGD
Publication :
2nd International conference on sustainable development, strategies and challenges With a focus on Agriculture, Natural Resources, Environment and Tourism(2icsda.ir)
Abstract :
In order to eliminate and separate the weeds from the soil by mixing the soil plowed, the separation device and weed eradication is applied. Places variable soil conditions, physical forces exerted on the finger to createtension in them. Stresses cause deformations caused lasting nail Angshtyhay tooth is, therefore, to determine the yield stress in the most difficult working conditions for the finger to prevent deformation lasting phenomenon, it seems necessary. This study, simulation and static analysis of a sample of tooth nail Angshtyhay by reverse engineering process, from design and modeling software for Solidworks 2013 and Ansys 2015 software for static analysis and determination of the yield stress, strain, deformation, energy and feed Make finger, research Drmzrhay silty-sandy soils located in the city of West Azerbaijan province was Buchanan. Digital static analysis results showed that the maximum yield at 0.262 MPa was detected near Tkhgah happens. The maximum values of strain, displacement, energy and minimum confidence / This amount equal to 856 at the rear of thumb, / obtained from fatigue analysis for fingers, respectively 6,614,160 2/6420 mm at the tip of the finger) work Hdaksrmq (6 for finger was . The results showed that the probability of cracking / 6/6646128 Jules in front of thumb and index finger indentations 845 and broke the finger-nail in the front and rear areas of fatigue, very high and this leads to permanent deformation of the finger. The causes This phenomenon can be pointed to low confidence. To prevent this phenomenon can be reduced incoming Mqdarnyrvy or of a material with a yield stress and high safety factor used.
Keywords : static analysis stress displacement fingers nail bar weeds