Numerical Study of single,dual and triple Orifice Synthetic Jet Effects on Heat Transfer
Numerical Study of single,dual and triple Orifice Synthetic Jet Effects on Heat Transfer
Hossein Hossein Pour Moghadam1 Jahanfar Khaleghinai2 Hesamoddin Salarian3
1) Islamic Azad University Nour branch Email:
2) Islamic Azad University Nour branch Email:
3) Islamic Azad University Nour branch Email:
IOI Code
:
XYAH-ZDFZD
Publication :
3rd international conference of Science and Engineering(3icesconf.com)
Abstract :
In the present dissertation, the numerical solution of flow field and heat transfer relating to a compressible synthetic jet is carried out under the three-dimensional unsteady conditions. Synthetic jets without needing to an external fluid source generate an oscillatory flow. These jets are generated by oscillation of a diaphragm or reciprocating of a piston in a cavity and are exited through an orifice. The continuity, momentum and energy equations are solved under the unsteady state condition. For discretization of equations a second order scheme is used and the SIMPLE algorithm is used for coupling the velocity and pressure equations. The turbulence model and an ideal gas assumption are used for simulating of turbulence flow and compressibility effect respectively. Numerical results are validated against available experimental data. The comparison between mean velocity numerical and experimental data shows little difference. Numerical results are validated against available experimental data. Also, vorticity field and flow field of impinging synthetic jet for three configurations of orifice, namely, single orifice, two orifices and three orifices under Reynolds number 445, frequency 420 and along with modelling moving wall have been investigated. In comparision of three configurations, in the case of two orifices, the presence of vorticies at outlet of orifice has neglegiable impact on each other while by moving toward target surface, the interaction of vorticies have increased. In the case of three orifices, interaction of vorticies has increased and as a result, breaking down of vorticies will be rapidly occurred. Also, the results of heat transfer in three configurations have been studied and in the case of two orifices, the average nusselt number is higher than two configurations. Although the average nusselt number of center of target surface is in the maximum value, the minimum value of the average nusselt number is located in the center of the surface for the cases of two and three orifices
Keywords : impinging synthetic jet turbulence modelling flow field heat transfer