An Expremental Measurment The Density Of Ammonia At Poultry House And Simulating The Effect Of Inlet Air Velocity For Jet Heater Combustion In a Constant Density Of Ammonia

An Expremental Measurment The Density Of Ammonia At Poultry House And Simulating The Effect Of Inlet Air Velocity For Jet Heater Combustion In a Constant Density Of Ammonia

shayan paknezhad1 mohammad moghiman2 Hamid shahabi3

1) Lecturer Department Of Mechnical Engineering, Torbat Jam Branch, Islamic Azad University,Torbat Jam, Iran
2) Professor Department Of Mechnical Engineering,Faculty Engineering ,Ferdowsi University , Mashhad, Iran
3) Asistant Professor Department Of Mechnical Engineering, Torbat Jam Branch, Islamic Azad University, Torbat Jam, Iran

IOI Code : XYBB-ZHFHA
Publication : 3rd International Conference On Research Science And Technology(3rstconf.com)
Abstract :
    Jet heaters are installed in poultry s halls in order to fulfill indoor air heating. To be more specific, jet heaters are installed inside of poultry halls to gain the required air for combustion from inside space of the halls directly. This study aims at investigating in simulating the effects of velocity inlet air s in the process of jet heaters combustion by employing K- ɛ- RNG turbulence model and also probability distribution function (PDF). In detail, in this study, Ammonia s density is considered stable (100ppm) inside the poultry which is the most available licensed amount. By considering the high velocity inlet air (mass flow rate) the jet heaters in the investigated sample, ranges of velocity were considered from the highest level up to Stoichiometry area between 2 to 11m⁄s.To this end, conservation forms of governing equations and turbulence model equation are solved by using finite volume method (FVM) and sample of algorithm. The results of this study indicate that Ammonia in poultry house with height from floor, decreased . The amount of exiting NOx pollutant in terms of velocity area is reduced between 2-4m⁄s, and also by increasing velocity, average temperature in the exit is decreased. The maximum temperature in the axial lenght, with the increased velocity to the end the furnace hase moved

Keywords : jet heater combustion density of ammonia inlet velocity