Simulation and analysis of a Three-Level Zero-Voltage Switching DC-DC Converter with Two Transformers in Series

Simulation and analysis of a Three-Level Zero-Voltage Switching DC-DC Converter with Two Transformers in Series

Zargham Heidari1

1) Faculty member in islamic azad univercity

IOI Code : XYBB-ZHGCZ
Publication : 3rd International Conference On Research Science And Technology(3rstconf.com)
Abstract :
    Abstract A three-level DC-DC converter comprising two transformers was analyzed and simulated. Like ordinary DC-DC three-level converters, this type of converter has no extra switches on the primary side of the transformer. In the diode rectifier section of this converter, the center tap transformer with four diodes was used. At the primary of the transformer, two transformers were connected in series. The middle node of the two transformers was connected to the neutral point of separate floating capacitors. Since this converter used a four-diode rectifier, the current in the transformer primary winding was reduced to zero during the idling period. The pre-phase voltage switching was determined via the energy stored in the output filter inductor, similar to a normal three-level converter. The zero-voltage switching in the delay switches (keys) was determined via the energy stored in the magnetizing inductor rather than that stored in the leakage inductor. In addition to reducing the output filter self-induction coefficient, this converter is capable of reducing rotational losses. For the reasons cited above, the proposed converter exhibits significantly higher efficiency compared with normal three-level converters. Keywords: Three-level converter, phase change, reduced circulating current, zero-voltage switching

Keywords : three level converter phase change reduced circulating current zero voltage switching