preliminary design of a solid rocket motor for space programs
preliminary design of a solid rocket motor for space programs
Hamad Raeisi1 Mohammadjavad Ahangaryan2
1) MSc in Aerospace Engineering, K.N. Toosi University of Technology
2) MSc in Aerospace Engineering, K.N. Toosi University of Technology
IOI Code
:
XYBD-ZKFZB
Publication :
4th International Conference On Research Science And Technology(4rstconf.com)
Abstract :
The objective of this paper is to preliminary design of a solid rocket motor for space programs. In this design procedure, average thrust, average chamber pressure, motor diameter, burn time and specific impulse are Input parameters and specific impulse is also intended as convergence criteria. Characteristic velocity is calculated, and thrust coefficient is achieved with a hypothetical value for the exit pressure nozzle. Then specific impulse was calculated and compared with input specific impulse. The nozzle exit pressure is changed as possible as to specific impulse becomes equal with input specific impulse. Then, nozzle throat diameter, nozzle exit diameter, nozzle area ratio, motor length were obtained. Also the mass of various parts of motor such as propellant, case, nozzle, insulation and engine total mass were calculated. With this method, three engines were redesigned. It was observed that there is good agreement between the results of the preliminary design and real one.
Keywords : solid rocket motor preliminary design space programs