Review adding alumina phosphate on Zeolite performance in the production of methanol and dimethyl ether
Review adding alumina phosphate on Zeolite performance in the production of methanol and dimethyl ether
ahmadmahmoodi1 amir hossein shahbazi kootanaei2 sara Maghsoudi3
1) Graduate student chemical engineering, transport phenomena tendency Islamic Azad University, mahshahr, Iran
2) Faculty member of Department of Chemical Engineering, Department of Mahshahr, Islamic Azad University, Mahshahr, Iran
3) Faculty member of Department of Chemical Engineering, Department of Mahshahr, Islamic Azad University, Mahshahr, Iran
IOI Code
:
XYCB-ABZKC
Publication :
1st International Congress on Engineering Innovation and Development of Technology(iceiconf.ir)
Abstract :
Severe air pollution all over the world and reduction of oil resources gained attentions to use dimethyl ether (DME ) as a clean and alternative fuel more than ever. Correction of zeolite catalyst in this research through DME production by methanol was tested by adding an alumina phosphate promoter to catalyst structure. The physical and chemical properties of the catalyst sample were assessed using XRD, NH3-TPD, and BET techniques. A catalytic reactor test was conducted to produce DME in a fixed-bed reactor at 485°C and WHSV=0.8h-1. Research findings proved that alumina phosphate is highly effective in catalyst performance. The optimum temporal performance conditions occurred when alumina phosphate to alumina ratio in the catalyst is 0.7.
Keywords : conversion process methanol to propylene improving metal fixed bed reactor catalyst hzsm 5