Set Point Automatic Adjustment for Voltage and Current Control of Distributed Generation Units in Grid-Connected and Autonomous (Islanded) Modes
Set Point Automatic Adjustment for Voltage and Current Control of Distributed Generation Units in Grid-Connected and Autonomous (Islanded) Modes
mohammad reza Tavana1 mohammad mahdi ghanbarian2 ali reza roosta3
1) Kazerun Islamic Azad Univercity of Electrical
2) Kazerun Islamic Azad Univercity of Electrical Engineering,kazerun,IRAN
3) Shiraz University of Technology Institute of Electrical Engineering and Electronicse-mail:
IOI Code
:
XYCC-ABHZF
Publication :
International Conference on Science and Engineering(icesconf.com)
Abstract :
Low power renewable sources connected to low voltage micro-grids (MGs) are becoming more and more common. Since there is a high degree of uncertainty on the availability of such sources, this causes problems of stability and makes difficult to guarantee the power quality (PQ) in all the points of the grid. In the last several years, efforts toward the standardization of these MGs have been made. In this sense, this thesis presents the hierarchical control to endow smartness and flexibility to MGs. The hierarchical control proposed consists of three levels: 1) The primary control is based on the droop method, including an output-impedance virtual loop; 2) the secondary control allows the restoration of the deviations produced by the primary control; and 3) the tertiary control manages the power flow between the MG and the external electrical distribution system. This thesis describes a control approach applied on a distributed generation (DG) to provide both voltage and frequency regulation capabilities, and hence, an improvement in the dynamic behavior of a MG system.
Keywords : micro grid hierarchical control voltage and frequency control