Impact Resistance and Mechanical Properties of Self-Consolidating Concrete Made with Different Values of the Paste Volume

Impact Resistance and Mechanical Properties of Self-Consolidating Concrete Made with Different Values of the Paste Volume

parviz ghoddousi1 ali akbar shirzadi javid2 javad rostaei patappeh3 mohammad soltanian4

1) Iran University of Science and Technology
2) Iran University of Science and Technology
3) Iran University of Science and Technology
4) Iran University of Science and Technology

IOI Code : XYCE-ACFZG
Publication : International Conference on Civil Engineering, Architecture and urban infrastructure(icica.ir)
Abstract :
    In this study, types of self-consolidating concrete (SCC) with different amounts of cement, limestone powder and granite stone powder were made and rheological parameters, mechanical properties and impact resistance of samples were investigated. Therefore, SCC samples with both granite stone powder and limestone powder with various paste volume between 290 lit/m3 to 410 lit/m3 were made. The results show SCC containing 330 lit/m3 volume of the paste matrix, in terms of parameters such as slump flow showed the best results. Compressive strength of concrete containing 100 kg/m3 of the stone powder as a filler have increased about 5.5 Mpa compare with concrete without stone powder. But higher increasing of powder to 300 kg/m3 caused to reduce compressive strength. While increasing amounts of stone powder, impact energy was considerably increased. With the increasing amount of limestone powder from 100 kg/m3 to 300 kg/m3, impact energy of samples were increased from 368 KN.mm to 1257 KN.mm. This finding shows that, stone powder is effective in the impact resistance of SCC concrete, while scattering results are observed in the compressive strength and other mechanical properties such as tensile and flexural strength.

Keywords : impact resistance self consolidating concrete stone powder paste volume