Determination correlation coefficient between the geoid-quasigeoid sparation calculated using the ICGEM data in sjoberg equation and GPS/Levelling method

Determination correlation coefficient between the geoid-quasigeoid sparation calculated using the ICGEM data in sjoberg equation and GPS/Levelling method

Ata Eshaghzadeh1 Zohreh Moeini Hekmat2

1) M.sc student , Institute of Geophysics, University of Tehran, Iran. Email :
2) Department of Geophysics, Islamic Azad University, Hamedan, Iran. Email:

IOI Code : XYCE-ACKGK
Publication : International Conference on Civil Engineering, Architecture and urban infrastructure(icica.ir)
Abstract :
    The geoid is an equipotential surface of the Earth that corresponds to mean sea level, whereas the quasi geoid is a geometrical surface referred to a normal height system. The geoid undulation (N) is the separation between the ellipsoid and the geoid measured along the ellipsoidal normal. The height anomaly (ζ) is the separation between the reference ellipsoid and quasigeoid along the ellipsoid normal. There is similar concept of orthometric heights (pp0) measured along plumb line whereas, normal heights (QQ0) are measured along the ellipsoidal normal. These reference surfaces of the geodesy are shown in Figure 1. The Global Positioning System (GPS) has been extensively utilized in surveying and mapping applications worldwide. The geoid is used to transform the GPS-derived ellipsoidal heights to orthometric heights used in surveying and mapping. The combination of gravimetrically derived quasi-geoid heights over a target area with ellipsoidal heights provided by GPS has become a standard procedure in quasi-geoid and height reference surface modelling (e.g., Fotopoulos 2005 and many others). The main motivation for combining these types of data seems to be: (i) to improve the quality of the gravimetrically derived quasi-geoidmodel for the target area, or (ii) to facilitate the more direct transformation of GPS ellipsoidal heights into the heights of the adopted national height system (cf. Featherstone 1998). The reference surface for a national height system is the quasi-geoid for normal and normal-orthometric heights or the geoid for orthometric heights; in practice, there may be significant differences between the quasi-geoid/geoid and the national height reference surface. For instance, differences may be caused by subsidence/uplift of the markers of the first-order height control network (cf. Lysaker et al. 2007), or by simplifications used in the computation of geopotential numbers (e.g., Vanicek et al. 1980). Traditionally, global and local gravimetric quasi-geoid models are determined and, then, fitted to GPS/levelling data. In this study, a comparison is made of the geoid-quasigeoid sparation calculated using the satellite data in sjoberg equation and GPS/Levelling method. For this purpose we estimate the correlation coefficient of the numerical results according to: (1) Where and are the average of two sets of numerical. The investigation made in three selected areas the Lout, Zagroos and Khozestan of Iran. In this paper is used of the ICGEM website for definition the variables of the sjoberg equation. The resulted geoied model of sjoberg method are fitted to GPS/levelling data and to compare their integrity and accuracy. We show that we can compute a unique quasi-geoid using available satellite data in ICGEM. For calculation the sjoberg equation, it is necessary to computed the effect potential of the mass beetwen geoied and earth surface. Because of environment around calculated point is considered as juxtaposed prisms with distinct elevation for disply topography above geoid. The used reference model in this paper is the EGM2008 global geopotential model and WGS84 reference ellipsoid. Earth Gravitational Model (EGM2008) is the most up to date and high resolution model up to degree 2160 which has been developed and published by National Geospatial-Intelligence Agency.

Keywords : geoied quasigeoid gps/levelling sjoberg equation icgem