Static and dynamic analysis of mine tailing dam gol-gohar against earthquakes caused by blasting

Static and dynamic analysis of mine tailing dam gol-gohar against earthquakes caused by blasting

manouchehr. abdoli nejad1 Mohammad. Zounemat-Kermani (Ph.D.)2 hamidreza. mohammadi3

1) Graduate student, hydraulic structures, Azad University,sirjan
2) Assistant Professor, Department of Water Engineering, martyr Bahonar University of Kerman
3) MA, hydraulic structures, construction management, the company Gol Gohar Sirjan

IOI Code : XYCE-ADECZ
Publication : International Conference on Civil Engineering, Architecture and urban infrastructure(icica.ir)
Abstract :
    Gol Gohar clay core tailings dam is located at 53 km southwest of Sirjan city and situated in southern of the mine. The dam located in moderate seismic risk region and its height and with is respectively 25 and 9 meters. This study is done by Geo studio 2007 version software which is one of the powerfull FE program. Static analysis is done by Sigma / W using Duncan – Chang non-linear model. Quake / W program with Equivalent Linear model is used in dynamic analysis. For dynamic analysis acceleration data for the highest record have taken from seismogram device named Blastmate. Vertical displacement counters for end of construction and full conditions are determinedAt the end of meters of vertical displacement in both the construction and the tank filled to the maximum Mdnd.dr meeting in terms of the construction of the dam, which is equivalent to 20 cm mid-range core occurs. Dewatering increase amounts to 25 cm is normal meeting .myzan calculated stress in both the 550 and 650 kPa is respectively. Based on the obtained results, in the case of the mine blasting, the tailing dam will be safe.

Keywords : "embankment dam with clay core" " static and dynamic analysis" "tailings dam " "blasting" "seismogram"