Evaluating methods of strengthening steel frame structures and determining the optimal method
Evaluating methods of strengthening steel frame structures and determining the optimal method
bahram azizi1
1) Master s degree in civil engineering, structural department, Islamic Azad University, Yasouj
IOI Code
:
XYCF-KAGEE
Publication :
2nd.International Congress on Management, Economy, Humanities and Business Development(icmba.ir)
Abstract :
There are different methods for strengthening metal columns, which include strengthening the column with FRP, strengthening the column with a metal jacket, and strengthening the column with a concrete jacket. The purpose of this research is to investigate and compare different methods of strengthening columns and the effect of geometrical characteristics on the behavior and buckling capacity of metal columns with concrete jacket as the best method of strengthening steel frame buildings in Gachsaran city. Abaqus software was used for modeling. The final buckling capacity of the metal column was investigated with changes in the geometrical dimensions. Based on the results of the changes in the buckling capacity of the column reinforced with concrete jacket against the changes in the dimensions of the column in the first mode, it was observed that with the increase in the dimensions of the steel box sheet column, the value of the buckling capacity in the first mode has an upward trend from the dimensions of 20 to 40 cm and from 77.2 tons reached 532.2 tons. which was a growth of 6.9 times. Further, with the increase of the dimension to 50 cm, the buckling capacity has decreased from 532 tons to 403 tons, which is a decrease of 24.1%. Also, based on the results of the changes in the buckling capacity of the column reinforced with concrete jacket against the changes in the dimensions of the column in the first mode, it has been observed that with the increase in the dimensions of the steel box sheet column, the value of the buckling capacity in the first mode has an upward trend from the dimensions of 20 to 40 cm. And it has reached 547 tons from 80.02 tons, which is an increase of 6.8 times. Further, with the increase of the dimension to 50 cm, the buckling capacity decreased from 547 tons to 416.1 tons, which is a decrease of 23.9%. Further, based on the results of the changes in the buckling capacity of the column reinforced with concrete jacket against the changes in the dimensions of the column in the third mode, it was observed that with the increase in the dimensions of the steel box column, the value of the buckling capacity in the third mode had a completely upward trend. By increasing the column dimension from 20 cm to 30 cm, 40 cm and 50 cm, the buckling capacity has been increased by 1.84, 3.04 and 4.74 respectively.
Keywords : reinforcement steel jacket concrete jacket frp column