Design and Simulation of CMOS UWB LNA

Amir Payandehpour1

1) Iran University of Shahid Chamran Ahwaz Email:

IOI Code : XYCZ-AAEBZ
Publication : International Conference on Engineering and Applied Science(iceasconf.com)
Abstract :
    This article presents a design of a low power CMOS ultra-wide band (UWB) low noise amplifier (LNA) using a noise canceling technique with the TSMC 0.18μm RF CMOS process. The proposed UWB LNA Employs a current-reused structure to decrease the total power consumption using cascade stage. This structure spends the same DC current for operating two transistors simultaneously. The stagger-tuning technique, which was reported to achieve gain flatness in the required frequency, was adopted to have low and high resonance frequency points over the entire bandwidth from 3.1 to 10.6 GHz. The resonance points were set in 3GHz and 10GHz to provide enough gain flatness and return loss. In addition, the noise canceling technique was used to cancel the dominant noise source, which is generated by the first transistor. The simulation results show a flat gain(S21>25dB)with a good input impedance matching less than –9 dB and a minimum noise figure of 2.5 dB over the entire band. The proposed UWB LNA consumed 19mW from a 1.8V power supply.

Keywords : lna uwb lna noise canceling tsmc 0 18