Iron control in copper electrowinning circuit in sarcheshme using ion-exchange resins

Iron control in copper electrowinning circuit in sarcheshme using ion-exchange resins

samaneh sadat nabatolhodaee1 mahmod eskandari nasab2 seyed morteza mosavi rad3 masumeh torabi parizi4

1) Masters Student, Islamic Azad University, Sirjan Email:
2) Professor Of Higher Education Zarand Email:
3) Professor Of Higher Education Zarand Email:
4) Researchers and development of Sarcheshmeh Copper Complex Email:

IOI Code : XYCZ-AAFGG
Publication : International Conference on Engineering and Applied Science(iceasconf.com)
Abstract :
    Abstract The presence of iron ion in copper electrowining solutions causes to decrease the current efficiency of cell. This loss is due to oxidation of ferrous to ferric at the anode and reduction of ferric to frrous at the cathode. In this study, the performance of ion-exchange process, for removal of iron ion from electrowining solution. In the ion-exchange process the feasibility of removal of iron ion by Auchlite C 467, Auchlite C 26 SP and Purolite C 100 resin was performed in batch expriments. The effects of various parameters such as sulfuric acid concentration, amount of resin, temprature and initial concentration of iron ion were examined on removal efficiency. In the middle of resin to study, Auchlite C 467 resin have to the best operation. Removal of iron ion by this resin reached to equilibrium within 120 minutes and maximum removal was 60% at iron ion concentration of 3000 mg/l for 4ml resin. Results show that isotherm equilibrium data can be fitted with the Langmuir adsorption isotherms and the adsorption of iron ions on the resin follows pseudo second-order kinetics.

Keywords : iron removal electrowining solution ion exchange process ion exchange resin