Predicting Maximum Horizontal Displacement of the Wall and the Maximum Tensile Force in Reinforcements for Reinforced Soil Wall under Sliding Mechanism
Predicting Maximum Horizontal Displacement of the Wall and the Maximum Tensile Force in Reinforcements for Reinforced Soil Wall under Sliding Mechanism
Masoud Ahang1 Adel Asakereh2
1) M.A. in Geotechnical Engineering, Hormozgan University, Email:
2) Associate Prof., Faculty of Civil Eng., Hormozgan University, Email:
IOI Code
:
XYCZ-AAGDD
Publication :
International Conference on Engineering and Applied Science(iceasconf.com)
Abstract :
Geosynthetic reinforced soil walls are usually designed based on limit equilibrium methods in which the effects of the foundation, the reinforcement stiffness, the facing, and other parameters are ignored. However, the design procedures do not consider the deformation of the walls explicitly. In this study, the finite difference method is used to perform analysis. Creating proper boundary conditions for the reference wall, the performance of reinforced soil wall has been investigated in the sliding deformation mode. Numerical study was conducted to investigate the effect of system’s various parameters on the wall performance; especially, the maximum tensile force in the reinforcements and the horizontal displacement of the wall were investigated only for the sliding external instability. Among various parameters studied, the most important parameters include reinforcement stiffness, backfill soil friction angle, and reinforcement length. To design reinforced soil walls, the ratio of the reinforcement length to wall height (L/H) is recommended 0.5 to 0.8. The current numerical study tried to predict the maximum horizontal displacement and maximum tensile force in the wall reinforcement through curves. The results revealed that there is a particular pattern between the maximum horizontal displacements of the walls and maximum tensile forces in the reinforcements. These are presented in the form of charts; using these charts, the so-called cases may be predicted for the walls with different heights.
Keywords : reinforced soil wall flac sliding maximum horizontal displacements of the wall maximum tensile force in the reinforcement