A new method in treating wastewater containing DMSO hybrid system using AOPs-A
A new method in treating wastewater containing DMSO hybrid system using AOPs-A
کارشناسی ارشد، دانشگاه آزاد ماهشهر، ماهشهر، ایران.1 استادیار گروه مهندسی شیمی، دانشگاه خلیج فارس، بوشهر، ایران.2
1) Masters, University of Mahshahr, Mahshar, Iran
2) Department of Chemical Engineering, University of the Persian Gulf, Bushehr, Iran
IOI Code
:
XYCZ-AAKZG
Publication :
International Conference on Engineering and Applied Science(iceasconf.com)
Abstract :
In this research, the application process is a combination of Fenton chemical oxidation -adsorption in industrial effluents containing DMSO was evaluated. In the first part the effect of operating conditions such as the ratio Fe2 + /H2O2 and concentration of DMSO in the fixed time of 120 minutes, in the second part; the equilibrium time, clinoptilolite adsorbent dosage and temperature on the removal of DMSO was studied. Two steps testing were conducted at fixed pH=3. In order to identify the absorption of analysis XRD, SEM, BET and BJH was used. The results show that in the chemical oxidation, the Fe2 + /H2O2 equal to 33, the concentration of pollutants is equal to 500 ppm and on the adsorption, the equilibrium time is equal to 60 minutes, DMSO and adsorbent concentration are 500 ppm,1 g/l, optimum conditions for the process is carried out. With this condition, the rate of removal of DMSO with Fenton process 67/05% and a combined process f oxidation-adsorption , 98/28%. the results in equilibrium time with Freundlich and Langmuir isotherm models and according to the highest correlation coefficient showed that the adsorption was correlated reasonably well by Freundlich isotherm model, the experimental data fitted well to pseudo-second order kinetic modelling.
Keywords : dmso fenton clinoptilolite wastewater adsorption