Numerical Analysis of Water Hammer Phenomenon Using the Method of Characteristics on a High Pressure Pumping Station

Numerical Analysis of Water Hammer Phenomenon Using the Method of Characteristics on a High Pressure Pumping Station

Ali Tamizi1 Yousef Hassanzadeh2

1) Dep. of Civil Eng., Faculty of Eng.,University of Tabriz, Tabriz, Iran Email:
2) Dep. of Civil Eng., Faculty of Eng.,University of Tabriz, Tabriz, Iran Email:

IOI Code : XYEA-AKKGD
Publication : The 4th International Congress On Civil Engineering, Architecture & Urban Development(4icsau.ir)
Abstract :
    Water hammer is a destructive hydrodynamic phenomenon occurring in unsteady under-pressure flows. This phenomenon occurs in water transmission pipelines due to sudden pump failure, which causes sudden and short-term change in pressure and creates positive and negative pressure waves in pipelines. Leaving this phenomenon uncontrolled and unadjusted can destruct water transmission systems.The governing equations of this phenomenon in the water transmission system from Chahenimeh Lake to the sidelines of Hamoun were analyzed in this paper using the method of characteristic with computer. Dimensions of the air chamber were calculated in order to control this phenomenon and adjusting the pressure waves was analyzed. Comparing the results of transmission lines with and without air chamber in different sizes indicated that the probability of water hammer occurrence in pipeline and creation of negative pressures, which are the factors of vacuum formation, increased; therefore this phenomenon would be controlled and adjusted significantly by embedding air chamber in appropriate size.

Keywords : water hammer method of characteristic unsteady flow pumping station hammer v8i