Investigating the Effect of kind of aggregate, water absorption and strength of rock and concrete strength on the permeability of resulted concrete using the cylindrical chamber method

Investigating the Effect of kind of aggregate, water absorption and strength of rock and concrete strength on the permeability of resulted concrete using the cylindrical chamber method

Rezvan Valibeigi1 Mahmood Naderi2 Seyed Mohammad Mirsafi3

1) Head of Civil Dept, Lowshan Technical College (Ministry of Road and Urban Development Campus
2) Professor of International Imam Khomeini University
3) M.Sc. Structural Engineering

IOI Code : XYEA-BABCB
Publication : The 4th International Congress On Civil Engineering, Architecture & Urban Development(4icsau.ir)
Abstract :
    Permeability is one of the most important factors affecting in the durability of concrete. So in this article, the effect of concrete strength, water absorption, density and strength of rock on the permeability of concrete is studied. In the Studied concrete is used separately from eight types rock with different characteristics namely silica stone, marble, andesite, limestone, travertine, tuff, dense tuff, granite. To determine the permeability of concrete was used “cylindrical chamber” method. The Cylindrical chamber is the exact and widely applicable method to determine permeability of concrete (and other construction materials) that can be used quite easily in the laboratory and in-situ (at the project site), and in all surfaces (horizontal, vertical, diagonal, and ceiling) with no needs to any expertise or considerable destruction Also, to study the strength of concrete and rock is used the “Twist-off” and uniaxial compressive strength methods. The “Twist-off method has capable of being used in the related research studies because of its precise results. This method is less-destructive and its merits include preciseness, speed, low cost, no need of expertise, repeatability, and minor damage repair with mortar. The results shown that the relationship between concrete strength and permeability of concrete with correlation between 0.67 and 0.77 is over than the correlation of other factors such as water absorption, density and strength of rock. Also, the concrete made with the travertine aggregates has highest and the concrete made with the granite aggregates concrete has lowest amount of water permeability. The Concrete made with dense tuff and marble aggregates has the relatively similar conditions in the amount of water permeability. Also, studies show that the permeability of concrete resulted from andesite and tuff aggregates is similar. The marble aggregates surfaces are obtained smooth and polished after crushing and fracture of the marble specimen was observed in the cement matrix-aggregate interface.

Keywords : permeability twist cylindrical chamber water absorption parent rock